Home > World Of ICT > ZYCOO® ZP302 IP PHONE

ZYCOO® ZP302 IP PHONE


Kedatangan barang-barang baru dari hasil pengadaan IMHERE berupa perangkat IPPhone seri ZYCOO® ZP302 sebanyak 40 Unit, rencananya device ini akan di distribusikan hingga ke level jurusan untuk perlahan-lahan menggantikan PABX Analog yang selama ini berfungsi. Karena berjumlah cukup banyak jadi tim memutuskan untuk memanfaatkan junior Elektro yang sedang di kaderisasi untuk menyelesaikan config IPPhone ini. Beruntung IPPhone  bisa di manage via web browser lumayan membantu ketika konfigurasi perangkat. kemarin sore sudah saya contohkan bagaimana menset up perangkat ini sekaligus test call ke Extension existing lawan  dengan menggunakan IPPhone dan Softphone (Xlite), hasilnya cukup memuaskan kualitas suara jernih dan OK sayup-sayup suara merdu saya terdengar di telinga junior elektro, sekarang tinggal set up perangkat masal, sekaligus delivery ke Unit Unit Kerja.

[trixbox1.localdomain ~]# cat /etc/*release
CentOS release 5.5 (Final)
[trixbox1.localdomain ~]#

[trixbox1.localdomain ~]# dmesg  | more
Linux version 2.6.18-164.11.1.el5 (mockbuild@builder16.centos.org) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-46)) #1 SMP Wed Jan 20 07:39:04 EST 2010
BIOS-provided physical RAM map:
Warning only 4GB will be used.
Use a PAE enabled kernel.
3200MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000ff780
Memory for crash kernel (0x0 to 0x0) notwithin permissible range
disabling kdump
Using x86 segment limits to approximate NX protection
On node 0 totalpages: 1048576
  DMA zone: 4096 pages, LIFO batch:0
  Normal zone: 225280 pages, LIFO batch:31
  HighMem zone: 819200 pages, LIFO batch:31
DMI present.
Using APIC driver default
ACPI: RSDP (v002 ACPIAM ) @ 0x000fa400
ACPI: XSDT (v001 SMCI 0x20101013 MSFT 0x00000097) @ 0xbf770100


Pantauan Log aktifitas SIP server

[trixbox1.localdomain ~]# asterisk -vvr
Asterisk 1.6.0.26-FONCORE-r78, Copyright (C) 1999 - 2010 Digium, Inc. and others.
Created by Mark Spencer <markster@digium.com>
Asterisk comes with ABSOLUTELY NO WARRANTY; type 'core show warranty' for details.
This is free software, with components licensed under the GNU General Public
License version 2 and other licenses; you are welcome to redistribute it under
certain conditions. Type 'core show license' for details.
=========================================================================
  == Parsing '/etc/asterisk/asterisk.conf':   == Found
  == Parsing '/etc/asterisk/extconfig.conf':   == Found
Connected to Asterisk 1.6.0.26-FONCORE-r78 currently running on trixbox1 (pid = 3167)
Verbosity is at least 3
trixbox1*CLI>
trixbox1*CLI>
trixbox1*CLI>
  == Using SIP RTP TOS bits 184
  == Using SIP RTP CoS mark 5
  == Using SIP VRTP TOS bits 136
  == Using SIP VRTP CoS mark 6
    -- Executing [1001@from-internal:1] Macro("SIP/1001-00000003", "exten-vm,novm,1001") in new stack
    -- Executing [s@macro-exten-vm:1] Macro("SIP/1001-00000003", "user-callerid") in new stack
    -- Executing [s@macro-user-callerid:1] Set("SIP/1001-00000003", "AMPUSER=1001") in new stack
    -- Executing [s@macro-user-callerid:2] GotoIf("SIP/1001-00000003", "0?report") in new stack
    -- Executing [s@macro-user-callerid:3] ExecIf("SIP/1001-00000003", "1?Set(REALCALLERIDNUM=1001)") in new stack
    -- Executing [s@macro-user-callerid:4] Set("SIP/1001-00000003", "AMPUSER=1001") in new stack
    -- Executing [s@macro-user-callerid:5] Set("SIP/1001-00000003", "AMPUSERCIDNAME=Gigih") in new stack
    -- Executing [s@macro-user-callerid:6] GotoIf("SIP/1001-00000003", "0?report") in new stack
    -- Executing [s@macro-user-callerid:7] Set("SIP/1001-00000003", "AMPUSERCID=1001") in new stack
    -- Executing [s@macro-user-callerid:8] Set("SIP/1001-00000003", "CALLERID(all)="Gigih" <1001>") in new stack
    -- Executing [s@macro-user-callerid:9] ExecIf("SIP/1001-00000003", "0?Set(CHANNEL(language)=)") in new stack
    -- Executing [s@macro-user-callerid:10] GotoIf("SIP/1001-00000003", "0?continue") in new stack
    -- Executing [s@macro-user-callerid:11] Set("SIP/1001-00000003", "__TTL=64") in new stack
    -- Executing [s@macro-user-callerid:12] GotoIf("SIP/1001-00000003", "1?continue") in new stack
    -- Goto (macro-user-callerid,s,19)
    -- Executing [s@macro-user-callerid:19] NoOp("SIP/1001-00000003", "Using CallerID "Gigih" <1001>") in new stack
    -- Executing [s@macro-exten-vm:2] Set("SIP/1001-00000003", "RingGroupMethod=none") in new stack
    -- Executing [s@macro-exten-vm:3] Set("SIP/1001-00000003", "VMBOX=novm") in new stack
    -- Executing [s@macro-exten-vm:4] Set("SIP/1001-00000003", "EXTTOCALL=1001") in new stack
    -- Executing [s@macro-exten-vm:5] Set("SIP/1001-00000003", "CFUEXT=") in new stack
    -- Executing [s@macro-exten-vm:6] Set("SIP/1001-00000003", "CFBEXT=") in new stack
    -- Executing [s@macro-exten-vm:7] Set("SIP/1001-00000003", "RT=""") in new stack
    -- Executing [s@macro-exten-vm:8] Macro("SIP/1001-00000003", "record-enable,1001,IN") in new stack
    -- Executing [s@macro-record-enable:1] GotoIf("SIP/1001-00000003", "1?check") in new stack
    -- Goto (macro-record-enable,s,4)
    -- Executing [s@macro-record-enable:4] AGI("SIP/1001-00000003", "recordingcheck,20111101-055624,1320101784.3") in new stack
    -- Launched AGI Script /var/lib/asterisk/agi-bin/recordingcheck
 recordingcheck,20111101-055624,1320101784.3: Inbound recording not enabled
    -- <SIP/1001-00000003>AGI Script recordingcheck completed, returning 0
    -- Executing [s@macro-record-enable:5] MacroExit("SIP/1001-00000003", "") in new stack
    -- Executing [s@macro-exten-vm:9] Macro("SIP/1001-00000003", "dial,"",tr,1001") in new stack
    -- Executing [s@macro-dial:1] GotoIf("SIP/1001-00000003", "1?dial") in new stack
    -- Goto (macro-dial,s,3)
    -- Executing [s@macro-dial:3] AGI("SIP/1001-00000003", "dialparties.agi") in new stack
    -- Launched AGI Script /var/lib/asterisk/agi-bin/dialparties.agi
 dialparties.agi: Starting New Dialparties.agi
 dialparties.agi: Caller ID name is 'Gigih' number is '1001'
 dialparties.agi: Methodology of ring is  'none'
    -- dialparties.agi: Added extension 1001 to extension map
    -- dialparties.agi: Extension 1001 cf is disabled
    -- dialparties.agi: Extension 1001 do not disturb is disabled
 dialparties.agi: EXTENSION_STATE: 1 (INUSE)
 dialparties.agi: Extension 1001 has call waiting enabled with state: 1
    -- dialparties.agi: dbset CALLTRACE/1001 to 1001
    -- dialparties.agi: Filtered ARG3: 1001
    -- <SIP/1001-00000003>AGI Script dialparties.agi completed, returning 0
    -- Executing [s@macro-dial:7] Dial("SIP/1001-00000003", "SIP/1001,"",tr") in new stack
  == Using SIP RTP TOS bits 184
  == Using SIP RTP CoS mark 5
  == Using SIP VRTP TOS bits 136
  == Using SIP VRTP CoS mark 6
    -- Called 1001
    -- SIP/1001-00000004 is ringing
trixbox1*CLI>
Disconnected from Asterisk server
Executing last minute cleanups
[trixbox1.localdomain ~]#


  1. No comments yet.
  1. No trackbacks yet.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: